MP3324GRE-P

Monolithic Power Systems (MPS)
946-MP3324GRE-P
MP3324GRE-P

メーカ:

詳細:
LED照明ドライバIC 8-Channel, 100mA/Ch, LED Driver with Se parated PWM/Analog Dimmingand I2C Interface

ECADモデル:
無料のライブラリローダーをダウンロードし、お使いのECADツール用にこのファイルを変換してください。ECADモデルの詳細について

在庫: 297

在庫:
297 すぐに出荷可能
最小: 1   倍数: 1
ユニット価格:
¥-
合計 額:
¥-
EST関税:

価格 (JPY)

数量 ユニット価格
合計 額
¥415.5 ¥416
¥309.7 ¥3,097
¥284.4 ¥7,110
¥254.4 ¥25,440
¥240.2 ¥60,050
完全リール(500の倍数で注文)
¥230.7 ¥115,350
¥221.2 ¥221,200
¥214.9 ¥537,250
¥211.7 ¥1,058,500

製品属性 属性値 属性の選択
Monolithic Power Systems (MPS)
製品カテゴリー: LED照明ドライバIC
RoHS:  
1 Output
Buck
QFN-24
16 V
4 V
1 MHz
- 40 C
+ 125 C
Reel
Cut Tape
ブランド: Monolithic Power Systems (MPS)
組立国: Not Available
拡散国: Not Available
原産国: CN
調光: PWM
取り付け様式: SMD/SMT
Pd - 電力損失: 2.97 W
製品タイプ: LED Lighting Drivers
工場パックの数量: 500
サブカテゴリ: Driver ICs
製品が見つかりました:
類似製品を表示するには、チェックボックスを1つ以上選択します
このカテゴリーの類似製品を表示するには、上記のチェックボックスを1つ以上選択してください。
選択した属性: 0

CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

MP3324 8-Channel White LED Drivers

Monolithic Power Systems (MPS) MP3324 8-Channel White LED (WLED) Drivers operate from 4V to 16V input voltage (VIN) range. These drivers apply eight internal current sources in each LED string terminal. The LED current of each channel is set by an external current-setting resistor, where each channel has a 100mA maximum current. The MP3324 WLED drivers support up to ten ICs cascaded to drive an LED array. These drivers employ separated Pulse Width Modulation (PWM) dimming and analog dimming for each LED channel.                                                                                                     

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.