SparkFun Electronics SparkFunアクセサリ

結果: 915
選択 画像 部品番号 メーカ 説明 データシート 在庫状況 価格: (JPY) 数量に基づき、単価ごとに表の結果をフィルタリングする 数量 RoHS ECADモデル 製品 タイプ
SparkFun SparkFunアクセサリ These are a pair of DG01D-E hobby motors with encoder with a hall speed encoder. The motor requires a voltage between 4.5-9V has a gearbox ratio of 1:48 and a speed of 140RPM at 4.5V. The voltage between positive and negative is determined according 在庫なし
最低: 1
複数: 1
Motors & Accessories Motor with Encoder
SparkFun SparkFunアクセサリ The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se 在庫なし
最低: 1
複数: 1

Sensors
SparkFun SparkFunアクセサリ Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receive 在庫なし
最低: 1
複数: 1

SparkFun SparkFunアクセサリ RedBot Sensor Mechanical Bumper 在庫なし
最低: 1
複数: 1

Sensors
SparkFun SparkFunアクセサリ This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo 在庫なし
最低: 1
複数: 1

Sensors
SparkFun SparkFunアクセサリ Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p 在庫なし
最低: 1
複数: 1

Sensors
SparkFun SparkFunアクセサリ This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the str 在庫なし
最低: 1
複数: 1

SparkFun SparkFunアクセサリ This is the main PCB assembly used in the RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see t 在庫なし
最低: 1
複数: 1
Replacement Parts RTK Facet Main Board v13
SparkFun SparkFunアクセサリ This is the enclosure and various bits needed to replace the housing of an RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! 在庫なし
最低: 1
複数: 1
Replacement Parts RTK - Facet Housing
SparkFun SparkFunアクセサリ This is the enclosure and various bits needed to replace the housing of an RTK L-Band Facet. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see the disassembly 在庫なし
最低: 1
複数: 1
Replacement Parts RTK - Facet L-Band Housing
SparkFun SparkFunアクセサリ This is the main PCB assembly used in the RTK L-Band Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! This board does not include 在庫なし
最低: 1
複数: 1
Replacement Parts RTK Facet L-Band Main Board v14
SparkFun SparkFunアクセサリ This is the black silicone protective sock that is stretched over the RTK Facet or RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken devic 在庫なし
最低: 1
複数: 1
Replacement Parts RTK - Facet Rubber Sock
SparkFun SparkFunアクセサリ This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb 在庫なし
最低: 1
複数: 1
SparkFun SparkFunアクセサリ This is a very simple fixed temp quick heating 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons but if you really need a cheap iron for your tool box this lovely iron is a good choice. This is a low-cost iron and it 在庫なし
最低: 1
複数: 1

SparkFun SparkFunアクセサリ We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af 在庫なし
最低: 1
複数: 1

SparkFun SparkFunアクセサリ We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af 在庫なし
最低: 1
複数: 1

SparkFun SparkFunアクセサリ This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm over 在庫なし
最低: 1
複数: 1
SparkFun SparkFunアクセサリ Parts Box LilyPad (Magnetic) 在庫なし
最低: 1
複数: 1

Tools & Supplies Storage Boxes & Cases
SparkFun SparkFunアクセサリ This is a high-quality switching 'wall wart' AC to DC 5.1V 2 500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly r 在庫なし
最低: 1
複数: 1

Power Supplies
SparkFun SparkFunアクセサリ When you're working with e-textiles you have a tendency to collect a lot of small parts: LilyPad boards bobbins needles...the tools of the trade. Why not pick up a sturdy box to keep your bits and pieces off the floor? This large LilyPad-branded b 在庫なし
最低: 1
複数: 1

Enclosures Large Parts Box
SparkFun SparkFunアクセサリ This is a high quality switching 'wall wart' AC to DC 5V 2000mA USB Micro-B wall power supply manufactured specifically for SparkFun Electronics. These are switch mode power supplies which mean the output is regulated to 5V and the capable output cur 在庫なし
最低: 1
複数: 1

Power Supplies Wall Adapter Power Supply - 5V, 2A (USB Micro-B)
SparkFun SparkFunアクセサリ These coated flat endmills are perfect for cutting aluminum. They have a ZrN coating which provides a better finish longer lifespan and a superior cut compared to a non-coated endmill.This cutter has a shorter flute length to provide greater rigidi 在庫なし
最低: 1
複数: 1
CNC Accessories Zrn Coated Flat Stud Cutter - 0.25 in Diameter
SparkFun SparkFunアクセサリ These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of our cutters are manufactured here in the US and begin life as a blank of 在庫なし
最低: 1
複数: 1
CNC Accessories Zrn Single Flute - 0.125 in Diameter
SparkFun SparkFunアクセサリ These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of 在庫なし
最低: 1
複数: 1
CNC Accessories Zrn Coated Single Flute - 0.25 in Diameter
SparkFun SparkFunアクセサリ These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of 在庫なし
最低: 1
複数: 1
CNC Accessories Zrn Coated Single Flute - 2 mm Diameter