SparkFun SparkFunアクセサリ

結果: 915
選択 画像 部品番号
 メーカ
説明 データシート 在庫状況 価格： (JPY) 数量に基づき、単価ごとに表の結果をフィルタリングする
数量 RoHS ECADモデル 製品
タイプ
SparkFun SparkFunアクセサリ This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur
データシート
25在庫
最低： 1
複数： 1
Switches
SparkFun SparkFunアクセサリ We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t 84在庫
最低： 1
複数： 1
Switches
SparkFun SparkFunアクセサリ These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole. 196在庫
最低： 1
複数： 1
SparkFun SparkFunアクセサリ We know this looks like a lot of our other LEDs but it's not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin except it is a lot simpler to solder into yo
データシート
34在庫
最低： 1
複数： 1
Optoelectronics LED
SparkFun SparkFunアクセサリ This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set
データシート
50在庫
納期・詳細を要確認
最低： 1
複数： 1
Switches
SparkFun SparkFunアクセサリ You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
データシート
3在庫
最低： 1
複数： 1

Optoelectronics LED - Red with Resistor
SparkFun SparkFunアクセサリ LilyPad Button Board
データシート
40在庫
納期・詳細を要確認
最低： 1
複数： 1

SparkFun SparkFunアクセサリ This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o 15在庫
最低： 1
複数： 1
SparkFun SparkFunアクセサリ Arduino ProtoShield- Bare PCB 3在庫
納期・詳細を要確認
最低： 1
複数： 1

Shields ProtoShield
SparkFun SparkFunアクセサリ ProtoShield Kit 7在庫
最低： 1
複数： 1

Shields ProtoShield
SparkFun SparkFunアクセサリ LilyPad Coin Cell Battery Holder 20mm
データシート
224在庫
最低： 1
複数： 1

Battery Holders Battery Holder - Coin Cell
SparkFun SparkFunアクセサリ LilyPad LED White (5pcs)
データシート
49在庫
120取寄中
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Rainbow (6 colors)
データシート
44在庫
35取寄中
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Pink (5pcs)
データシート
16在庫
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Green (5pcs)
データシート
35在庫
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Blue (5pcs)
データシート
8在庫
14取寄中
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Red (5pcs)
データシート
90在庫
最低： 1
複数： 1

SparkFun SparkFunアクセサリ LilyPad LED Yellow (5pcs)
データシート
17在庫
最低： 1
複数： 1

SparkFun SparkFunアクセサリ SparkFun Qwiic Shield for Arduino 21在庫
最低： 1
複数： 1

Shields Qwiic Connect System
SparkFun SparkFunアクセサリ The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
データシート
3在庫
最低： 1
複数： 1

Boards LilyPad E-Sewing ProtoSnap
SparkFun SparkFunアクセサリ The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
データシート
2在庫
最低： 1
複数： 1
Carrier Boards Weather:bit
SparkFun SparkFunアクセサリ The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
データシート
14在庫
最低： 1
複数： 1
Shields Qwiic Shield

SparkFun SparkFunアクセサリ The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne 6在庫
最低： 1
複数： 1
Carrier Boards

SparkFun SparkFunアクセサリ Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the 6在庫
納期・詳細を要確認
最低： 1
複数： 1
Carrier Boards
SparkFun SparkFunアクセサリ The ANN-MB-00 is a high-performance active GNSS antenna designed to take full advantage of modern multi-band receivers. Unlike standard single-band antennas this unit is tuned to receive both L1 and L2 frequencies across GPS GLONASS Galileo and B
データシート
12在庫
納期・詳細を要確認
最低： 1
複数： 1

Antennas GNSS Multi-Band Magnetic Mount Antenna - 5m